Usata machine tool

2015 HELLER FT 8000

• Produttore: Heller
• Modello: FT 8000

Number of axes: 5 | Tool holder type: SK50 | Spindle power: 60 [kW] | Spindle speeds: 50-8000 [rpm] | Speed ranges: 2 | Travels on x/y/z axes: 1250 / 1200 / 1400 [mm] | Rapid traverses rates (x/y/z): 50 [m/min] |...

XINGYUE CZ-36my Spline Cold Roll Machine

Technical parameter: CZ-36MY Unit | Loaded tool length: 36 Inch | Max. module: 1.75 m | Max. teeth diameter: 50 mm | Workpiece length: 800 mm | Cylindricity: 0.015 mm | Roughness: 0.4-1.6 μm | Max. roll forming l...

2017 MAZAK SMART 430A L

• Produttore: Mazak
• Modello: SMART 430A

Number of axes: 3 | Tool holder type: ISO40 | Spindle power: 18,5 [kW] | Spindle speeds: 12.000 [rpm] | Travels on x/y/z axes: 560 x 430 x 510 [mm] | Rapid traverses rates (x/y/z): 42 sur le X et 36 en Y/Z [m/min...

2016 NAKAMURA Super NTMX

• Produttore: Nakamura
• Modello: SUPER NTMX

Number of axes: 9 | Number of spindles: 2 | Spindle nose: A2-5 | Spindle power: 7,5 [kW] | Spindle speeds: 12000 [rpm] | Max. bar diameter: 51 [mm] | Max. turning diameter: 200 [mm] | C axis indexing precision: 0...

2008 BUMOTEC S 191

• Produttore: Bumotec
• Modello: S 191

Number of axes: 7 | Number of spindles: 2 | Spindle power: 8 [kW] | Spindle speeds: 30000 [rpm] | Max. bar diameter: 42 [mm] | C axis indexing precision: 0.001 [°] | Travel: 330 [mm] | X/z stroke: 410/400 [mm] | ...

2014 HAAS VF-6SS

• Produttore: Haas
• Modello: VF-6SS
• Cono del mandrino: CT 40

Numero di assi: 3 | Corsa dell'asse x: 1626 mm | Corsa dell'asse y: 813 mm | Corsa dell'asse z: 762 mm | Mandrino: Direct-drive, 22.4 kW (30 hp) motor | Velocità massima del mandrino: 12000 rpm | Spindle taper / ...

XINYUE CZ-48my Spline Cold Forming Rolling Machine

• Produttore: Xinyue

Technical parameter: CZ-48MY Unit | Loaded tool length: 48 Inch | Max. module: 2.00 m | Max. teeth diameter: 60 mm | Workpiece length: 800 mm | Cylindricity: 0.02 mm | Roughness: 0.4-1.6 μm | Max. roll forming le...

XINYUE CZ-24my Spline Cold Rolling Forming Machine

• Produttore: Xinyue

Technical parameter: CZ-24MY Unit | Loaded tool length: 24 Inch | Max. module: 1.25 m | Max. teeth diameter: 40 mm | Workpiece length: 800 mm | Cylindricity: 0.015 mm | Roughness: 0.4-1.6 μm | Max. roll forming l...

2014 SYNTAK MRU-32

• Produttore: SYNTAK

Number of axes: 5 | Tool holder type: BT40 | Spindle power: 18,5 [kW] | Spindle speeds: 12.000 [rpm] | Travels on x/y/z axes: 700/600/500 [mm] | Rapid traverses rates (x/y/z): 30 [m/min] | Travel: 360 [°] (+/-) |...

2007 OPS INGERSOLL OPS 550

• Produttore: OPS Ingersoll

Number of axes: 5 | Tool holder type: HSK32 | Spindle power: 17 [kW] | Spindle speeds: 30-42000 [rpm] | Travels on x/y/z axes: 550/400/400 [mm] | Rapid traverses rates (x/y/z): 30 [m/min] | Travel: 360 [°] | Inde...

2007 CHIRON Mill 800

• Produttore: Chiron
• Modello: MILL 800

Marca di controllo: FANUC | Modello di controllo: 18i MB5 | Corsa dell'asse x: 800 mm | Corsa dell'asse y: 500 mm | Corsa dell'asse z: 550 mm | Il diametro massimo sarebbe: 65 mm / pinze disponibili fino a 50 mm ...

2007 INDEX G250

• Produttore: Index
• Modello: G250

Number of axes: 8 | Number of spindles: 1 | Spindle nose: ISO 702/1-8 | Spindle power: 27,5 [kW] | Spindle speeds: 12.000 [rpm] | Max. bar diameter: 102 [mm] | Max. diameter on bench: 560 [mm] | Max. chuck diamet...

2013 HWACHEON T2-2T YSMC

• Produttore: Hwacheon
• Modello: T2-2T

Number of spindles: 2 | Number of axes: 8 | Number of turrets: 2 | Spindle nose: A2-6 | Spindle power: 15 [kW] | Spindle speeds: 5000 [rpm] | Max. bar diameter: 65 [mm] | Max. chuck diameter: 210 [mm] | C axis in...

2011 QUASER MV 154 P

• Produttore: Quaser
• Modello: MV154

Number of axes: 3 | Tool holder type: ISO40 BIG PLUS | Spindle power: 25 [kW] | Spindle speeds: 12000 [rpm] | Travels on x/y/z axes: 760/530/560 [mm] | Rapid traverses rates (x/y/z): 6950/6950/11300 [Nm] | Auto. ...